View NBXDBA017_4557884.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017 3.3 V, 156.25 MHz / 312.5 MHz LVPECL Clock Oscillator
The single and dual frequency crystal oscillator (XO) is designed to meet today's requirements for 3.3 V LVPECL clock generation applications. The device uses a high Q fundamental crystal and Phase Lock Loop (PLL) multiplier to provide selectable 156.25 MHz or 312.5 MHz, ultra low jitter and phase noise LVPECL differential output. This device is a member of ON Semiconductor's PureEdget clock family that provides accurate and precision clock solutions. Available in 5 mm x 7 mm SMD (CLCC) package on 16 mm tape and reel in quantities of 1,000. Frequency stability options available as either 50 PPM NBXDBA017, NBXSBA017, NBXHBA017 (Industrial Temperature Range) or 20 PPM NBXDBB017 (Commercial Temperature Range).
Features
http://onsemi.com
6 PIN CLCC LN SUFFIX CASE 848AB
MARKING DIAGRAMS
NBXDBA017 156.25/312.50 AWLYYWWG NBXDBB017 156.25/312.50 AWLYYWWG
* * * * * * * * *
LVPECL Differential Output Uses High Q Fundamental Mode Crystal and PLL Multiplier Ultra Low Jitter and Phase Noise - 0.4 ps (12 kHz - 20 MHz) Selectable Output Frequency - 156.25 MHz (default) / 312.5 MHz Hermetically Sealed Ceramic SMD Package RoHS Compliant Operating Range 3.3 V 10% Total Frequency Stability - 20 PPM or 50 PPM This is a Pb-Free Device
NBXSBA017 312.5 AWLYYWWG
NBXHBA017 156.25 AWLYYWWG
156.25/312.5 A WL YY WW G
= Output Frequency (MHz) = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package
Applications
* Networking * 10 Gigabit Ethernet
VDD 6 CLK CLK 54
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.
Crystal
PLL Clock Multiplier
1 OE
2 FSEL/NC*
3 GND
Figure 1. Simplified Logic Diagram
* NBXSBA017 and NBXHBA017 only
(c) Semiconductor Components Industries, LLC, 2009
March, 2009 - Rev. 2
1
Publication Order Number: NBXDBB017/D
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
OE FSEL GND 1 2 3 6 5 4 VDD CLK CLK OE NC GND 1 2 3 6 5 4 VDD CLK CLK
NBXDBA017/NBXDBB017
NBXSBA017/NBXHBA017
Figure 2. Pin Connections (Top View) Table 1. PIN DESCRIPTION
Pin No. 1 2 3 4 5 6 Symbol OE I/O LVTTL/LVCMOS Control Input LVTTL/LVCMOS Control Input Power Supply Description Output Enable Pin. When left floating pin defaults to logic HIGH and output is active. See OE pin description Table 2.
AAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAA AA
FSEL/ NC* GND CLK CLK VDD Output Frequency Select Pin. Pin will default to logic HIGH when left open. See Output Frequency Select pin description Table 3. Ground 0 V LVPECL Output LVPECL Output Power Supply Non-Inverted Clock Output. Typically loaded with 50 W receiver termination resistor to VTT = VDD - 2 V. Inverted Clock Output. Typically loaded with 50 W receiver termination resistor to VTT = VDD - 2 V. Positive power supply voltage. Voltage should not exceed 3.3 V 10%. *NBXSBA017 and NBXHBA017 only.
Table 2. OUTPUT ENABLE TRI-STATE FUNCTION
OE Pin Open HIGH Level LOW Level Output Pins Active Active High Z
Table 3. OUTPUT FREQUENCY SELECT
FSEL Pin Open (pin will float high) HIGH Level LOW Level
Output Frequency (MHz) 156.25 156.25 312.5
Table 4. ATTRIBUTES
Characteristic Input Default State Resistor ESD Protection Human Body Model Machine Model Value 170 kW 2 kV 200 V
Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test 1. For additional Moisture Sensitivity information, refer to Application Note AND8003/D.
Table 5. MAXIMUM RATINGS
Symbol VDD Iout TA Tstg Tsol Parameter Positive Power Supply LVPECL Output Current Operating Temperature Range Storage Temperature Range Wave Solder See Figure 6 Condition 1 GND = 0 V Continuous Surge Condition 2 Rating 4.6 25 50 -40 to +85 -55 to +120 260 Units V mA C C C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
http://onsemi.com
2
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
Table 6. DC CHARACTERISTICS (VDD = 3.3 V 10%, GND = 0 V, TA = -40C to +85C) (Note 2)
Symbol IDD VIH VIL IIH IIL VOH VOL VOUTPP Characteristic Power Supply Current (Note 2) OE and FSEL Input HIGH Voltage OE and FSEL Input LOW Voltage Input HIGH Current Input LOW Current OE FSEL OE FSEL VDD = 3.3 V Output LOW Voltage (Note 2) VDD = 3.3 V Output Voltage Amplitude (Note 2) 2000 GND - 300 -100 -100 -100 -100 VDD-1195 2105 VDD-1945 1355 660 Conditions Min. Typ. 78 Max. 100 VDD 800 +100 +100 +100 +100 VDD-945 2355 VDD-1600 1700 Units mA mV mV mA mA mV mV mV
Output HIGH Voltage (Note 2)
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 2. Measurement taken with outputs terminated with 50 ohm to VDD-2 V. See Figure 5.
http://onsemi.com
3
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
Table 7. AC CHARACTERISTICS (VDD = 3.3 V 10%, GND = 0 V, TA = -40C to +85C) (Note 3)
Symbol fCLKOUT Characteristic Output Clock Frequency Conditions FSEL = HIGH FSEL = LOW Df Frequency Stability - NBXDBB017 - NBXDBA017/NBXSBA017/NBXHBA017 Phase-Noise Performance fCLKout = 156.25 MHz/312.5 MHz (See Figures 3 and 4) 0C to +70C -40C to +85C (Note 4) 100 Hz of Carrier 1 kHz of Carrier 10 kHz of Carrier 100 kHz of Carrier 1 MHz of Carrier 10 MHz of Carrier tjit(F) tjitter RMS Phase Jitter Cycle-to-Cycle, RMS Cycle-to-Cycle, Peak-to-Peak Period, RMS Period, Peak-to-Peak tOE/OD tDUTY_CYCLE tR tF tstart Output Enable/Disable Time Output Clock Duty Cycle (Measured at Cross Point) Output Rise Time (20% and 80%) Output Fall Time (80% and 20%) Start-up Time Aging 1st Year Every Year After 1st 48 50 250 250 1 12 kHz to 20 MHz 1000 Cycles 1000 Cycles 10,000 Cycles 10,000 Cycles -108/-102 -122/-115 -129/-122 -129/-122 -137/-131 -161/-159 0.4 1 7 0.6 5 0.9 8 30 4 20 200 52 400 400 5 3 1 Min. Typ. 156.25 312.5 20 50 ppm Max. Units MHz
FNOISE
dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps ps ps ps ps ns % ps ps ms ppm ppm
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. Measurement taken with outputs terminated with 50 ohm to VDD-2 V. See Figure 5. 4. Parameter guarantees 10 years of aging. Includes initial stability at 25C, shock, vibration, and first year aging.
http://onsemi.com
4
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
Figure 3. Typical Phase Noise Plot at 156.25 MHz
Figure 4. Typical Phase Noise Plot at 312.5 MHz
http://onsemi.com
5
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
Table 8. RELIABILITY COMPLIANCE
Parameter Shock Mechanical Mechanical Mechanical Mechanical Solderability Vibration Standard Method MIL-STD-833, Method 2002, Condition B MIL-STD-833, Method 2003 MIL-STD-202, Method 215
AAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAA AAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A
MIL-STD-833, Method 2007, Condition A MIL-STD-833, Method 1011, Condition A Solvent Resistance Thermal Shock Environment Environment Moisture Level Sensitivity MSL1 260C per IPC/JEDEC J-STD-020D NBXxxxxxx CLK Driver Device CLK Zo = 50 W 50 W 50 W D Zo = 50 W D Receiver Device VTT VTT = VDD - 2.0 V
Figure 5. Typical Termination for Output Driver and Device Evaluation (See Application Note AND8020/D - Termination of ECL Logic Devices.)
Temperature (C) 260 217
temp. 260C 20 - 40 sec. max. peak 3C/sec. max. ramp-up
6C/sec. max.
cooling
175 150
pre-heat reflow 60180 sec. 60150 sec. Time
Figure 6. Recommended Reflow Soldering Profile
http://onsemi.com
6
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
ORDERING INFORMATION
Device Order Number NBXDBB017LN1TAG NBXDBA017LN1TAG NBXSBA017LN1TAG NBXHBA017LN1TAG* NBXDBB017LNHTAG NBXDBA017LNHTAG NBXSBA017LNHTAG NBXHBA017LNHTAG* Package Type CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) CLCC-6 (Pb-Free) Shipping 1000 / Tape & Reel 1000 / Tape & Reel 1000 / Tape & Reel 1000 / Tape & Reel 100 / Tape & Reel 100 / Tape & Reel 100 / Tape & Reel 100 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *Please contact sales office for availability
http://onsemi.com
7
NBXDBB017, NBXDBA017, NBXHBA017, NBXSBA017
PACKAGE DIMENSIONS
6 PIN CLCC, 7x5, 2.54P CASE 848AB-01 ISSUE C
D
4X
A
0.15 C
D1
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. DIM A A1 A2 A3 b D D1 D2 D3 E E1 E2 E3 e H L R SEATING PLANE MIN 1.70 0.08 1.30 6.17 6.66 4.37 4.65 MILLIMETERS NOM MAX 1.80 1.90 0.70 REF 0.36 REF 0.10 0.12 1.40 1.50 7.00 BSC 6.20 6.23 6.81 6.96 5.08 BSC 5.00 BSC 4.40 4.43 4.80 4.95 3.49 BSC 2.54 BSC 1.80 REF 1.27 1.37 0.70 REF
TERMINAL 1 INDICATOR
E2
H E1
E
D2 TOP VIEW A3 0.10 C A A1 SIDE VIEW D3
1 2 3
A2
1.17
C
SOLDERING FOOTPRINT*
e
6X
R
E3
1.50
5.06
0.10 C A B 0.05 C
6X
b
6
5
4 6X
L 2.54 PITCH
BOTTOM VIEW
1.50
DIMENSION: MILLIMETERS
6X
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
PureEdge is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
8
NBXDBB017/D

▲Up To Search▲

Price & Availability of NBXDBA017

	To Download NBXDBA017 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .